Electromagnetic pulse valve

Page views：
Update time： 2026-10-21

Would you like to know about this product?

Call us：0519-86153308

Product Introduction

The key equipment of the ash cleaning system for the baghouse dust collector is the electromagnetic pulse valve, and its selection is related to the cost and ash cleaning effect of the dust collector.

The electromagnetic pulse valve we select for the XLMC low-pressure pulse baghouse dust collector is rated for a injection pressure of less than 0.3 MPa, with a size of 3 inches and a voltage of DC24V. Its diaphragm is durable with a normal service life of 1 million injections. It meets the requirements for efficient operation of the pulse solenoid valve and greatly reduces maintenance workload.

Component List of DCF Series Solenoid Pulse Valves
Serial No	Part Name	quantity
1	valve seat	1
2	Diaphragm assembly	1
3	large spring	1
4	valve cover	1
5	Pilot valve seat	1
6	O-ring	1
7	Pilot head pressure plate	1
8	Pilot head assembly	1
9	electromagnetic coil	1
10	small spring	1
11	General small diaphragm assembly	1

Performance Parameters of Solenoid Pulse Valve：

work pressure：	Z-type valve: 0.4~0.6Mpa Y-type valve: 0.2~0.6Mpa ZM-type valve: 0.4~0.6Mpa
working medium：	No corrosive media in the ambient air
Gas source medium：	Temperature <55℃, clean gas with adjustable pressure that has undergone degreasing and water treatment and a filtration precision of <5μm
Voltage：	DC24V、（AC220V/50HZ）
electric current：	0.8A （0.05A）
Usage environment：	1、temperature：-25℃~55℃55℃~180℃ 2、The relative humidity of the air is no more than 85% 3、Protection grade conforms to IP64
Diaphragm Service Life：	100万次
Pulse valve service life：	It can be used for five years under the conditions of standardized installation, proper use and reasonable maintenance.